Garmin G1000H, Cockpit Reference Manual

Page: 18 / 136

Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A
2
Flight Instruments
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
ENABLE/DISABLE OBS MODE WHILE NAVIGATING WITH GPS
1)
Press the
OBS
Softkey to select OBS Mode.
2)
Turn a CRS Knob to select the desired course to/from the waypoint. Press a
CRS
Knob to synchronize the Selected Course with the bearing to the next
waypoint.
3)
Press the
OBS
Softkey again to disable OBS Mode.
ENABLE HEADING PRESET MODE
1)
Press the
SET HDG
Softkey on the PFD. The system is in Heading Preset
Mode (HPM) as indicated by displaying ‘SET’ to the left of the heading
value.
2)
Press the
HDG +
and/or
HDG -
Softkeys to slew the heading value to the
desired setting.
Or:
Set the Selected Heading Bug to the desired heading value, then press the
HDG SYNC
Softkey.
DISABLE HEADING PRESET MODE
Press the
HPM OFF
Softkey on the PFD to manually disable Heading Preset
Mode.
Or:
Heading Preset Mode automatically disables after eight minutes.
If there is more than 10° difference between the Heading Preset value and the
magnetic heading when Heading Preset Mode is disabled, the heading value is
displayed in yellow and ‘ALN’ will be displayed to the left of the heading. When the
magnetic heading has properly aligned, the heading value will be displayed in white
and ‘ALN’ will no longer be displayed.