Garmin G1000H, Cockpit Reference Manual

Page: 43 / 136

Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A
27
Flight Planning
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
FLIGHT PLANNING
WEIGHT PLANNING
All procedures apply to the MFD unless otherwise stated.
Entering Payload Parameters
Turn the large
FMS
Knob to select the ‘AUX’ page group. Turn the small
FMS
Knob to select the Weight Planning Page.
1)
Press the
EMPTY WT
Softkey to place the cursor in the Basic Empty Weight
field.
2)
Enter the desired aircraft empty weight.
3)
Press the ENT Key. The cursor is now over the ‘PILOT & STORES’ field.
4)
Enter the desired weight of Pilot & Stores.
5)
Press the ENT Key.
6)
Continue repeating these steps until all desired weights have been entered.
Entering Fuel Parameters
1)
If necessary, press the
FMS
Knob to activate the cursor.
2)
Turn the large FMS Knob to place the cursor in the ‘FUEL ON BOARD’ field.
3)
Press the
FOB SYNC
Softkey to enter the fuel on board quantity as read
from the fuel quantity sensors.
Or:
Manually enter the desired fuel quantity.
4)
Press the
ENT
Key. The cursor is now in the ‘FUEL RESERVES’ field.
5) Enter the desired reserve fuel quantity.
6)
Press the
FMS
Knob to remove the cursor.
TRIP PLANNING
1)
Turn the large FMS Knob to select the ‘AUX’ page group.
2)
Turn the small
FMS
Knob to select the Trip Planning Page.
3) The current ‘PAGE MODE’ is displayed at the top of the page: ‘AUTOMATIC’
or ‘MANUAL’. To change the page mode, press the
AUTO
or
MANUAL
Softkey.