Garmin G1000H, Cockpit Reference Manual

Page: 105 / 136

Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A
89
Annunciations & Alerts
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
Voice Alert Description
“High”, “Low”, “Same
Altitude” (if within 200
feet of own altitude), or
“Altitude not available”
Intruder relative altitude (GTS 800 only)
“Less than one mile”,
“One Mile” through
“Ten Miles”, or “More
than ten miles”
Intruder distance (GTS 800 only)
MFD & PFD MESSAGE ADVISORIES
Message Comments
DATA LOST
– Pilot stored data was
lost. Recheck settings.
The pilot profile data was lost. System reverts
to default pilot profile and settings. The pilot
may reconfigure the MFD & PFDs with preferred
settings, if desired.
XTALK ERROR
– A flight display
crosstalk error has occurred.
The MFD and PFD are not communicating with
each other. The system should be serviced.
PFD1 SERVICE
– PFD1 needs
service. Return unit for repair.
The PFD and/or MFD self-test has detected a
problem. The system should be serviced.
MFD1 SERVICE
– MFD1 needs
service. Return unit for repair.
MANIFEST
– PFD1 software
mismatch, communication halted.
The PFD and/or MFD has incorrect software
installed. The system should be serviced.
MANIFEST
– MFD1 software
mismatch, communication halted.
PFD1 CONFIG
– PFD1 config error.
Config service req’d.
The PFD configuration settings do not match
backup configuration memory. The system should
be serviced.
MFD1 CONFIG
– MFD1 config
error. Config service req’d.
The MFD configuration settings do not match
backup configuration memory. The system should
be serviced.
SW MISMATCH
– GDU software
version mismatch. Xtalk is off.
The MFD and PFD have different software versions
installed. The system should be serviced.