Garmin G1000H, Cockpit Reference Manual

Page: 57 / 136

Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A
41
Procedures
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
PROCEDURES
LOAD AND ACTIVATE A DEPARTURE PROCEDURE
1)
Press the
PROC
Key.
2) Turn the large FMS Knob to highlight ‘SELECT DEPARTURE’.
3)
Press the
ENT
Key. The cursor is displayed in the ‘DEPARTURE’ field with a
list of available departures.
4)
Turn the large
FMS
Knob to highlight the desired departure.
5) Press the ENT Key. A list of runways may be displayed for the departure. If
so, turn either FMS
Knob
to select the desired runway.
6)
Press the
ENT
Key. The cursor is displayed in the ‘TRANSITION’ field with a
list of available transitions.
7)
Turn the large
FMS
Knob to highlight the desired transition.
8)
Press the ENT Key.
9)
With ‘LOAD?’ highlighted, press the
ENT
Key. The departure is active when
the flight plan is active.
ACTIVATE A DEPARTURE LEG
1) Press the FPL Key on the MFD to display the active flight plan.
2)
Press the
FMS
Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired waypoint within the
departure.
4) Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
5)
With ‘ACTIVATE’ highlighted, press the
ENT
Key.
LOAD AN ARRIVAL PROCEDURE
1)
Press the
PROC
Key.
2)
Turn the large FMS Knob to highlight ‘SELECT ARRIVAL’.
3)
Press the
ENT
Key. The cursor is displayed in the ‘ARRIVAL’ field with a list
of available arrivals.