Garmin Fishfinder 80, Quick Reference Manual

Page: 5 / 6

1. Some routes may require manual navigation by
the pilot between waypoints. These points will
be noted in the Flight Plan page as “Pilot Nav.”
2. Active guidance is not provided to the pilot.
Follow procedural directions.
3. Once the Pilot Nav Leg is completed, press the
key to sequence to the next leg in your
flight plan.
SUSP
Navigating a Pilot Nav Leg
If the holding pattern is in the database for the
destination waypoint of your flight plan,
follow the automatic guidance on the unit display.
Navigating a Holding Pattern
Holding Pattern is in the database
1. Press ( ).
2. Turn the knob to highlight the desired
waypoint to perform the holding pattern.
3. Press the key.
4. Use the and knobs to select
Right or Left turn, Course, and hold leg time
or length.
5. Press .
6. When you reach the holding pattern, flight plan
sequencing is suspended (SUSP will appear)
automatically. Roll steering guidance is
available.
7. Press to exit the hold pattern and to
return to the flight plan, or press or
to exit holding pattern.
DIRECT-TO D->
Large
Hold
Large Small
Menu/Enter
SUSP
D-> FlyLeg
Holding Pattern Inserted While On Route
Course To operation allows you to add an intercept
course to the selected waypoint. Upon reaching
the selected waypoint, the flightplan will sequence
to the next waypoint in the flightplan normally.
1. Press .
a. Press and turn the knob to
select a waypoint in your flight plan.
b. Press and select a new waypoint, if
desired, with the and knobs.
2. Press (you may have to press
first).
3. Change the course bearing, if desired. Use the
and knobs to change the course
value.
4. Press .
Direct-To
WPTS Large
or
DB
Large Small
CrsTo More
Large Small
Menu/Enter
Direct-To - Intercept Course To Wpt
The Course From operation allows you to
navigate from a waypoint on a selected
course. When the Course From operation is
executed, the CDI will indicate FROM and the
flightplan will go into suspend mode (SUSP);
it will not automatically sequence the
flightplan waypoints.The airplane will track
outbound on the selected radial until instructed
otherwise.
1. Press . Select a new waypoint,
if desired, with the and knobs.
2. Press .
3. Change the course bearing, if desired.
Turn the knob to change the 10’s
value. Turn the knob to change the
1’s value.
4. Press .
Direct-To
Large Small
CrsFr
Large
Small
Menu/Enter
(you may have to press
first)
More
Direct-To - Intercept Course From Wpt
With the FlyLeg Menu selection you can
activate a particular leg of your flight plan. If
you have picked an invalid leg a message will
appear to warn you.
1. Press . Press the smart key
if necessary.
2. Select the desired leg of your flight plan with
the knob.
3. Press the key to activate the
selected leg.
Direct-To WPTS
Large
FlyLeg
Direct-To - FlyLeg
When the OBS mode is active, use the CDI/HSI
control to set an intercept course to any
waypoint as you would with a radial for a VOR.
1. Press . Select a new waypoint, if
desired, with the and knobs,
otherwise the destination waypoint is used.
2. Press . Now use the external CDI/HSI
resolver to control the selected course.
Direct-To
Large Small
OBS
Direct-To - OBS
1. Press and then the smart key.
2. Turn the knob or press the or
smart keys to switch between Old or New
messages.
3. Turn the knob to view the available
messages.
FN MSG
Large New Old
Small
Messages (MSG)