Garmin eTrex Legend C Owner'S Manual Download Page 82

Page: 82 / 92

eTrex Legend C

Appendix

Data Field Options

Velocity Made Good -

The rate of closure on a destination based upon

your current speed and course of travel.

Vertical Speed -

The rate of altitude gain/loss over time.

Vertical Speed Dest -

The measurement of your rate of accent to a

predetermined height.

Water Speed -

The data acquired from measurement devices interfaced

to the eTrex Legend C is used to calculate your current speed over water.

Water Temperature -

The temperature of water at a measured depth

using measurement devices interfaced to the eTrex Legend C.

Waypoint - Destination -

The last point on a route, your destination.

Waypoint - Next -

The next point on your route.

eTrex Legend C Owner's Manual Text.indd 72

8/12/2004, 9:25:39 AM

Summary of Contents for eTrex Legend C





























































































Search results

Summary of Contents for eTrex Legend C

Reviews:

Related manuals for eTrex Legend C

Brands by name

Popular brands

Garmin eTrex Legend C, Owner'S Manual

Search results

Summary of Contents for eTrex Legend C

Reviews:

Related manuals for eTrex Legend C

Brands by name

Popular brands