manualshive.com logo in svg

Garmin ECHOMAP UHD2 5 Series, Owner'S Manual, Page: 5 / 76

Share
Download
Garmin ECHOMAP UHD2 5 Series Owner'S Manual Download Page 5

Garmin ClearVü Sonar View................. 42
Flasher View.......................................... 43
Selecting the Transducer Type............ 44
Selecting a Sonar Source..................... 44

Renaming a Sonar Source................ 44

Creating a Waypoint on the Sonar 

Screen.................................................... 44
Pausing the Sonar Display.................... 44
Viewing Sonar History.......................... 45
Adjusting the Level of Detail.................45
Adjusting the Color Intensity................ 45
Sonar Setup........................................... 46

Setting the Zoom Level on the Sonar 

Screen................................................ 46
Setting the Scroll Speed.................... 47
Adjusting the Range.......................... 47
Sonar Noise Rejection Settings........ 48
Sonar Appearance Settings.............. 48
Sonar Alarms..................................... 49
Advanced Sonar Settings................. 49
Transducer Installation Settings...... 49
Sonar Frequencies............................ 50
Turning On the A-Scope.................... 51

Gauges and Graphs........................ 51

Viewing the Gauges.............................. 51
Changing the Data Shown in a 

Gauge..................................................... 52
Customizing the Gauges...................... 52
Viewing Trip Gauges............................. 52
Resetting Trip Gauges.......................... 52
Viewing Graphs..................................... 52

Setting the Graph Range and Time 

Scales................................................. 52

Warning Manager........................... 53

Viewing Messages................................ 53
Sorting and Filtering Messages........... 53
Saving Messages to a Memory Card... 53
Clearing All of the Messages............... 53

Device Configuration...................... 53

System Settings.................................... 53

Sounds and Display Settings............ 53
GPS Settings...................................... 54
Viewing System Software 

Information........................................ 54

Viewing E-label Regulatory and 

Compliance Information................... 54

Preferences Settings............................ 54

Units Settings.................................... 55
Navigation Settings........................... 55

Communications Settings.................... 56
Setting Alarms....................................... 56

Navigation Alarms............................. 57
System Alarms.................................. 57
Sonar Alarms..................................... 57

My Vessel Settings............................... 58

Setting the Keel Offset...................... 59
Setting the Water Temperature 

Offset................................................. 60

Restoring the Original Chartplotter 

Factory Settings.................................... 60

Sharing and Managing User Data.... 60

Selecting a File Type for Third-Party 

Waypoints and Routes.......................... 60
Copying User Data from a Memory 

Card........................................................ 61
Copying User Data to a Memory 

Card........................................................ 61
Updating Built-In Maps with a Memory 

Card and Garmin Express..................... 61
Backing Up Data to a Computer........... 61
Restoring Backup Data to a 

Chartplotter........................................... 62
Saving System Information to a Memory 

Card........................................................ 62

Appendix........................................ 62

ActiveCaptain and Garmin Express..... 62
Garmin Express App............................. 62

Installing the Garmin Express App on a 

Computer........................................... 63
Registering Your Device Using the 

Garmin Express App..........................63
Updating Your Charts Using the 

Garmin Express App..........................64
Software Updates.............................. 64

Cleaning the Screen.............................. 65
Viewing Images on a Memory card..... 66
Screenshots...........................................66

Capturing Screenshots..................... 66
Copying Screenshots to a 

Computer........................................... 66

Table of Contents

iii

Summary of Contents for ECHOMAP UHD2 5 Series













































































Reviews:

No comments