Garmin ECHOMAP UHD2 5 Series Owner'S Manual Download Page 55 | Manualshive

Page: 55 / 76

background image

Sonar Alarms

WARNING

The sonar alarms feature is a tool for situational awareness only and may not prevent grounding in all
circumstances. It is your obligation to ensure safe operation of the vessel.

CAUTION

The Beeper setting must be turned on to make alarms audible (

Sounds and Display Settings, page 53

). Failure

to set audible alarms could lead to injury or property damage.

NOTE: Not all options are available on all transducers.
From an applicable sonar view, select MENU > Sonar Setup > Alarms.
You can also open the sonar alarms by selecting > Alarms > Sonar.
Shallow Water: Sets an alarm to sound when the depth is less than the specified value.
Deep Water: Sets an alarm to sound when the depth is greater than the specified value.
Water Temp.: Sets an alarm to sound when the transducer reports a temperature that is 2°F (1.1°C) above or

below the specified temperature.

Contour: Sets an alarm to sound when the transducer detects a suspended target within the specified depth

from the surface of the water and from the bottom.

Fish: Sets an alarm to sound when the device detects a suspended target.

•

sets the alarm to sound when fish of all sizes are detected.

•

sets the alarm to sound only when medium or large fish are detected.

•

sets the alarm to sound only when large fish are detected.

Advanced Sonar Settings

From a Traditional sonar view, select MENU > Sonar Setup > Advanced.
Btm. Srch. Limit: Limits the search for the bottom to the depth selected when the Range setting is set to Auto.

To minimize the length of time it takes to find the bottom, you can select a depth to limit the search for the
bottom. The device will not search for the bottom deeper than the selected depth.

Transducer Installation Settings

These settings apply to the following types of sonar.
• Traditional
• Garmin ClearVü
From an applicable sonar view, select an option.
• From a Traditional sonar view, select MENU > Sonar Setup > Installation.
• From a Garmin ClearVü sonar view, select MENU > ClearVü Setup > Installation.
Restore Sonar Defaults: Restores the sonar settings to the factory default values.
Transducers: Allows you to change the transducer, view details about the transducers, and save details to a

memory card.

Sonar Fishfinder

49

«
...
53
54
55
56
57
...
»

Summary of Contents for ECHOMAP UHD2 5 Series













































































Reviews:

No comments

Related manuals for ECHOMAP UHD2 5 Series

Brand: Navman Pages: 20

Brand: Navman Pages: 70

Marine Rescue GPS

Brand: Nautilus Lifeline Pages: 9

Brand: V-Sun Pages: 19

Brand: Raymarine Pages: 84

ECHOMAP UHD2 5X

Brand: Garmin Pages: 10

AT PLUS_CDMA(3G)

Brand: Prime Pages: 8

Brand: Toplovo Pages: 11

TRAFFIC ASSIT 7928

Brand: Becker Pages: 108

Brand: Raytheon Pages: 93

Brand: Philips Pages: 68

Brand: Philips Pages: 70

VideoTracer VTR8300

Brand: Philips Pages: 72

VideoTracer VTR8410

Brand: Philips Pages: 76

Brand: Philips Pages: 76

VideoTracer VTR8400

Brand: Philips Pages: 90

Brand: Syride Pages: 19

Brand: Flymaster Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands