Garmin ECHOMAP UHD2 5 Series Owner'S Manual Download | Manualshive

Page: 50 / 76

background image

Selecting the Transducer Type

This chartplotter is compatible with a range of accessory transducers, including the Garmin ClearVü
transducers, which are available at

garmin.com/transducers

If you are connecting a transducer that was not included with the chartplotter, you may need to set the
transducer type to make the sonar function properly.
NOTE: Not all chartplotters and sonar modules support this feature.
1 Complete an action:

• From a sonar view, select MENU > Sonar Setup > Installation > Transducers.
• Select > My Vessel > Transducers.

2 Select an option:

• To enable the chartplotter to detect the transducer automatically, select the transducer to change, and

select Auto Detect.

• To select the transducer manually, select the transducer to change, select the transducer model from the

list, and select Change Model.

NOTICE

Manually selecting a transducer could result in damage to the transducer or reduced transducer
performance.

NOTE: If you select the transducer manually, disconnect that transducer, and then connect a different
transducer, you should reset this option to Auto Detect.

Selecting a Sonar Source

This feature may not be available with all models.
When you are using more than one sonar data source for a particular sonar view, you can select the source to
use for that sonar view. For example, if you have two sources for Garmin ClearVü, you can select the source to
use from the Garmin ClearVü sonar view.
1 Open the sonar view for which you will change the source.
2 Select MENU > Sonar Setup > Source.
3 Select the source for this sonar view.

Renaming a Sonar Source

You can rename a sonar source to easily identify that source. For example, you use "Bow" as the name of the
transducer on the bow of your boat.
To rename a source, you must be in the applicable sonar view for the source. For example, to rename the
Garmin ClearVü sonar source, you must open the Garmin ClearVü sonar view.
1 From the sonar view, select MENU > Sonar Setup > Source > Rename Sources.
2 Enter the name.

Creating a Waypoint on the Sonar Screen

1 From a sonar view, select or .
2 Select a location.
3 Select

.

4 If necessary, edit the waypoint information.

Pausing the Sonar Display

From a sonar view, select or .

To reactivate sonar after pausing, select BACK.

44

Sonar Fishfinder

«
...
48
49
50
51
52
...
»

Summary of Contents for ECHOMAP UHD2 5 Series













































































Reviews:

No comments

Related manuals for ECHOMAP UHD2 5 Series

Brand: Hummingbird Communications Pages: 88

Cellocator CelloTrack LTE Plus Lighter

Brand: Pointer Pages: 39

Brand: Boss Audio Systems Pages: 54

3410, 3450, 3460, 3490

Brand: Garmin Pages: 76

Brand: Shenzhen Pages: 8

Brand: Navitel Pages: 25

Brand: Harman Kardon Pages: 44

Brand: Lowrance Pages: 1

Brand: I-gotU Pages: 17

Brand: StarTrac Pages: 4

Personal Navigator GPS 100AVD

Brand: Garmin Pages: 27

Brand: Hardi Pages: 30

Brand: SafetyTracer Pages: 6

Brand: Four-Faith Pages: 46

Brand: Laipac Pages: 64

Brand: NAVTEQ Pages: 52

Brand: Furuno Pages: 44

Brand: RightWay Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands