Garmin ECHOMAP UHD2 5 Series Owner'S Manual Download Page 20 | Manualshive

Page: 20 / 76

background image

Charts and 3D Chart Views

The charts and 3D chart views that are available depend on the map data and accessories used.
NOTE: 3D chart views are available with premium charts, in some areas.
You can access the charts and 3D chart views by selecting Charts.
Nav. Chart: Shows navigation data available on your pre-loaded maps and from supplemental maps, if available.

The data includes buoys, lights, cables, depth soundings, marinas, and tide stations in an overhead view.

Fishing Chart: Provides a detailed view of the bottom contours and depth soundings on the chart. This chart

removes navigational data from the chart, provides detailed bathymetric data, and enhances bottom
contours for depth recognition. This chart is best for offshore deep-sea fishing.
NOTE: The Fishing chart is available with premium charts, in some areas.

Perspective 3D: Provides a view from above and behind the boat (according to your course) and provides a

visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and is
beneficial when trying to identify entry and exit routes in unfamiliar harbors or anchorages.

3D Chart: Shows a detailed, three-dimensional view from above and behind the boat (according to your course)

and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or
channels, and when trying to identify entry and exit routes in unfamiliar harbors or anchorages.

Fish Eye 3D: Provides an underwater view that visually represents the sea floor according to the chart

information. When a sonar transducer is connected, suspended targets (such as fish) are indicated by red,
green, and yellow spheres. Red indicates the largest targets and green indicates the smallest.

Relief Shading: Provides high resolution elevation shading of lakes and coastal waters. This chart can be

helpful for fishing and diving.
NOTE: The Relief Shading chart is available with premium charts, in some areas.

Navigation Chart and Fishing Chart

NOTE: The Fishing chart is available with premium charts, in some areas.
The Nav. Chart is optimized for navigation. You can plan a course, view map information, and use the chart as a
navigational aid. To open the Nav. Chart, select Charts > Nav. Chart.

The Fishing Chart provides a detailed view with more bottom detail and fishing content. This chart is optimized
for use when fishing. To open the Fishing Chart, select Charts > Fishing Chart.

14

Charts and 3D Chart Views

«
...
18
19
20
21
22
...
»

Summary of Contents for ECHOMAP UHD2 5 Series













































































Reviews:

No comments

Related manuals for ECHOMAP UHD2 5 Series

Brand: Navig8r Pages: 78

Brand: Sailbrain Pages: 35

RoadEZ Cars PT-REZ-UC-00-1410UET

Brand: S&T Pages: 16

Hyundai Santa Fe

Brand: Rosen Pages: 16

Brand: Westfalia Pages: 4

Brand: Here Pages: 3

TS-A1072R - Car Speaker - 20 Watt

Brand: Pioneer Pages: 5

Brand: Pioneer Pages: 8

AVIC-W8500NEX/XNUC

Brand: Pioneer Pages: 8

Brand: Pioneer Pages: 18

Brand: Pioneer Pages: 16

Premier AVIC-F90BT

Brand: Pioneer Pages: 57

Brand: Pioneer Pages: 190

AVIC-W8400NEX/XNUC

Brand: Pioneer Pages: 240

Premier AVIC-F90BT

Brand: Pioneer Pages: 192

Brand: MeiTrack Pages: 5

Brand: Garmin Pages: 12

Brand: VDO Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands