Garmin CR 1522, Owner'S Manual

Page: 49 / 74

3.4 Other Vessels 47
With MotionScope™ toggled on, select Sensitivity and use the main knob to change the
speed threshold for target highlighting. A higher setting highlights slower targets, and a
lower setting highlights only faster targets.
NOTE: Only available on Fantom models.
3.3.5 Selecting Target Size
You can adjust how the resolution of the radar image by selecting the size of targets.
Select Target Size and make a selection:
• Larger displays larger echoes for point targets, like boats and buoys.
• Normal displays normal sized targets.
• Smaller displays a sharp, high resolution radar image.
NOTE: Only available on Fantom models.
3.3.6 Extending Radar Pulses
You can increases the duration of the transmit pulse to maximize the energy directed
toward targets. This helps to enhance the detection and identification of targets.
Select Pulse Expansion to toggle pulse expansion on/off.
NOTE: This option is only available on xHD radome and xHD2 open array models.
3.3.7 Echo Threshold
You can adjust the threshold level for the returned echo. Signals below the threshold are
not shown on the radar display.
Select
Echo Threshold and use the main knob to adjust the threshold level.
NOTE: Echo Trail must be disabled (see 3.2.4 ).
3.4 Other Vessels
Press [MENU] > Other Vessels to manage other vessels, including TT, AIS, and ATON
targets, and change how they appear with these settings.
210
Menu
Settings
Preferences
Other Vessels
System
Appearance
Navigation Info
Alarms
Echo Tuning
Radar Setup
Other Vessels
TT
>
>
00:00
Show All
30.0 mph
>
AIS
Details
Projected Heading
Display Range
Display Speed
Vessel Outline
AIS Test
AIS Group
Communications
List