Garmin CR 1522 Owner'S Manual Download

Page: 2 / 74

without the written consent of Garmin. Garmin reserves the right to change or improve its products

and to make changes in the content of this manual without the obligation to notify any person or

organization of such changes or improvements. Go to

www.garmin.com

for current updates and

supplemental information concerning the use of this product.
Garmin

and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in

the USA and other countries. Fantom™, FUSION-Link™, Garmin ClearVü™, Garmin Connect™,

Garmin Helm™,Garmin LakeVü™, Garmin Quickdraw™, GCV™, GMR™, GRID™, GXM™, HomePort™,

MotionScope™, Panoptix™, Shadow Drive™, and SmartMode™ and are trademarks of Garmin Ltd. or

its subsidiaries. These trademarks may not be used without the express permission of Garmin.
SD™ and the SDHC logo are trademarks of SD-3C, LLC.
NMEA

, NMEA 2000

, and the NMEA 2000 logo are registered trademarks of the National Marine

Electronics Association.
Wi-Fi

is a registered mark of Wi-Fi Alliance Corporation.

Windows

is a registered trademark of Microsoft Corporation in the United Stations and other

countries.
All other trademarks and copyrights are the property of their respective owners. Other trademarks

and trade names are those of their respective owners.

Printed in Taiwan

March 2020

190-02655-2A Rev. A

製造銷售：台灣國際航電股份有限公司
製造地址：新北市汐止區樟樹二路68號

電　　話： (02) 2642-8999
客服專線： (02) 2642-9199

Summary of Contents for CR 1522











































































Search results

Summary of Contents for CR 1522

Reviews:

Related manuals for CR 1522

Brands by name

Popular brands

Garmin CR 1522, Owner'S Manual

Search results

Summary of Contents for CR 1522

Reviews:

Related manuals for CR 1522

Brands by name

Popular brands