3 - DIRECT-TO
63
190-00357-00 Rev G
Cancelling / Manual Course
Cancelling Direct-To Navigation
Once a direct-to is activated, the unit provides
navigation guidance to the selected waypoint until the
direct-to is manually cancelled or replaced by a new
active leg or direct-to.
To cancel a direct-to, select a new direct-to
waypoint, activate a flight plan or select the
“Cancel Direct-To NAV?” option.
To cancel a direct-to:
1. Press the
direct-to
key to display the Select
Direct-to Waypoint Page.
2. Press
MENU
to display the Direct-to Options
menu.
3. With “Cancel Direct-To NAV?” highlighted,
press
ENT
. If a flight plan is still active, the
unit resumes navigating the flight plan along
the closest leg.
Specifying a Course to a Waypoint
When you perform a direct-to, the unit sets a
direct geodetic course to the selected waypoint. You
can also manually define the course to the selected
waypoint, using the course field (“CRS”) on the Select
Direct-to Waypoint Page.
The “CRS” field allows you to define the
course to a selected waypoint. Use the small
and large right knobs to enter the desired
course.
To manually define the course to a waypoint:
1. Press the
direct-to
key.
2. Use the
small
and
large
right knobs to select
the desired waypoint.
3. Press
ENT
to confirm the selected waypoint,
then turn the
large right
knob to highlight
the course (“CRS”) field.
4. Turn the
small
and
large right
knobs to select
the desired course and press
ENT
.
5. Press
ENT
again to begin navigation using the
selected waypoint and course.
Summary of Contents for 500W Series
