manualshive.com logo in svg

Garmin 500W Series, Pilot'S Manual & Reference

The Garmin 500W Series comes with a comprehensive and essential tool, the Pilot's Manual & Reference. This manual is a must-have for all pilots, providing detailed instructions and valuable insights. Download this manual for free from manualshive.com and unlock the full potential of your Garmin 500W Series device.

Share
Download
background image

6 - WPT PAGES

123

190-00357-00 Rev G

Duplicate Waypoints

7.  To remove the flashing cursor, press the 

small 

right 

knob. 

Duplicate Waypoints

Once the identifier, facility name or location is 

entered, all six airport pages display information for 
the selected airport. As you enter an identifier, facility 
name or location, the Spell’N’Find™ feature scrolls 
through the database, displaying those waypoints 
matching the characters you have entered to that point. 
If duplicate entries exist for the entered facility name or 
location, additional entries may be viewed by continu-
ing to turn the 

small right 

knob during the selection 

process. If duplicate entries exist for an entered identi-
fier, a duplicate waypoint page appears once you select 
the identifier (by pressing 

ENT

). 

When selecting a waypoint by facility name or city, you can 

scroll through duplicate entries by continuing to turn the small 

right knob. 

To select a facility name or city location, where 
duplicate entries exist: 

1.  Select the desired facility name or location. 

2.  As  you  spell  the  facility  name  or  location, 

using the 

small

 and 

large right 

knobs, the 

500W-series unit Spell’N’Find feature selects 

the first entry in the database based upon the 

characters you have entered up to that point. 

3.  Continue turning the 

small right 

knob to scroll 

through any additional database listings for the 

selected facility name or location. You can scroll 

backwards  with  the 

small  right 

knob  if  you 

scroll past the desired facility name or location. 

4.  Press 

ENT

 to select the desired facility name 

or location. 

5.  To remove the flashing cursor, press the 

small 

right 

knob. 

To select a waypoint identifier from a list of 
duplicates: 

When selecting a waypoint by identifier, a 

Duplicate Waypoints window may appear, 

allowing you to select desired waypoint by 

type and region. 

1.  Select the desired airport or navaid identifier.  
2.  A Duplicate Waypoints window appears. Turn 

the 

large  right 

knob  to  select  the  desired 

waypoint and press 

ENT

. 

3.  To remove the flashing cursor, press the 

small 

right 

knob. 

Summary of Contents for 500W Series













































































































































































































































Reviews:

No comments

Related manuals for 500W Series

Garmin Forerunner 305 - Running GPS Receiver User Manual preview
Forerunner 305 - Running GPS Receiver
Brand: Garmin Pages: 10
J. W. Davis & Company BVR-10 User Manual preview
BVR-10
Brand: J. W. Davis & Company Pages: 68
Hummingbird Communications Matrix 67 Operation Manual preview
Matrix 67
Brand: Hummingbird Communications Pages: 88
Pointer Cellocator CelloTrack LTE Plus Lighter Overview preview
Cellocator CelloTrack LTE Plus Lighter
Brand: Pointer Pages: 39
Bushnell 360210 Quick Start Manual preview
360210
Brand: Bushnell Pages: 64
3Sense GPS-TS User Manual preview
GPS-TS
Brand: 3Sense Pages: 14
Audiovox NVX225 User Manual preview
NVX225
Brand: Audiovox Pages: 91
TELETRAC NAVMAN M-Nav800 Installation Training And Troubleshooting preview
M-Nav800
Brand: TELETRAC NAVMAN Pages: 35
S&T CAREU U1 User Manual preview
CAREU U1
Brand: S&T Pages: 37
F-Tech BT2.5MR User Manual preview
BT2.5MR
Brand: F-Tech Pages: 10
Garmin nuvi 1200 Quick Start Manual preview
nuvi 1200
Brand: Garmin Pages: 8
Acute 140 User Manual preview
140
Brand: Acute Pages: 13
Garmin fenix 2 Owner'S Manual preview
fenix 2
Brand: Garmin Pages: 26
Garmin eTrex Vista Owner'S Manual And Reference Manual preview
eTrex Vista
Brand: Garmin Pages: 84
Garmin GPSMAP 296 - Aviation GPS Receiver Quick Reference Manual preview
GPSMAP 296 - Aviation GPS Receiver
Brand: Garmin Pages: 2
PLURITAG TOF RTLS Reader Reference Manual preview
TOF RTLS Reader
Brand: PLURITAG Pages: 8
Satro PLB-110 User Manual preview
PLB-110
Brand: Satro Pages: 19
Transystem TripMate850 User Manual preview
TripMate850
Brand: Transystem Pages: 31

Brands by name

Popular brands

Load more brands