4 - FLIGHT PLANS
74
190-00357-00 Rev G
Select Departure
Select Departure?
allows you to select a pub-
lished standard instrument departure (SID) for the
departure airport, or replace the current departure
with a new selection. When using a direct-to, the
500W-series unit uses the nearest airport as a refer-
ence when displaying available departures. (See
Section 5 - Procedures
for information on selecting
departures using the
PROC
key.) Departures are
not available for all airports, in which case the
departure windows will show “NONE.”
To select a departure for the departure airport:
1. From the Active Flight Plan Page, press
MENU
to display the Active Flight Plan Page
Options.
2. Highlight the “Select Departure?” option from
the Active Flight Plan Page Options and press
ENT
.
3. A window appears listing the available depar-
tures for your departure airport. Turn the
small
right
knob to select the desired departure and
press
ENT
.
4. A second window appears listing available
transitions for the departure. Turn the
small
right
knob to highlight the desired transition
waypoint and press
ENT
.
5. A third window appears listing available run-
ways for the departure. Turn the
small right
knob to highlight the desired runway and press
ENT
.
6. With “Load?” highlighted, press
ENT
. The
departure is now inserted into your flight
plan.
Remove Approach, Arrival, or Departure
Remove Approach?
deletes the currently selected
approach from the active flight plan.
Remove Arrival?
deletes the current Arrival (STAR) from the active
flight plan.
Remove Departure?
deletes the current
departure (SID) from the active flight plan.
To remove an approach, arrival or departure from
the active flight plan:
1. Press
MENU
and turn the large right knob
to select the “Remove Approach?”, “Remove
Arrival?” or “Remove Departure?” option from
the active flight plan page options and press
ENT
.
Approaches, arrivals and departures can all
be removed from the active flight plan by
selecting the corresponding “Remove...”
option.
To remove an approach, arrival or departure from
the active flight plan:
1. From the Active Flight Plan Page, press
MENU
to display the Active Flight Plan Page Options.
2. Select the “Remove Approach?”, “Remove
Arrival?” or “Remove Departure?” option and
press
ENT
.
3. A confirmation window appears listing the pro-
cedure you are about to remove. With “Yes?”
highlighted, press
ENT
.
Active Flight Plan Options
Summary of Contents for 500W Series
