
8
and dust. Cut new filter material slightly larger than
the filter rack and place in the larger half of the filter
rack. Slip the smaller half of the filter rack into the
larger half. Repeat this for each filter rack and then
replace in the exhaust towers. Reset the EXHAUST
filter hours on the touch screen. Touch the word
EXHAUST filters on the touch screen to access
reset. On the filter schedule at the back of this
manual, record the date, time and hour meter
reading. Re-start the paint booth.
WARNING: USED EXHAUST FILTER
MATERIAL IS FLAMMABLE AND IS
SUSEPTIBLE TO SPONTAINOUS
COMBUSTION. DISPOSE OF PROPERLY.
CEILING FILTER CHANGE AT 1000-1200
HOUR INTERVALS
NOTE: ALTHOUGH ONE MAN CAN REPLACE
THE CEILING FILTERS, IT IS
RECOMMENDED THAT TWO PEOPLE
INSTALL THE NEW FILTERS TO INSURE
PROPER PLACEMENT. USE HAND TOOLS
ONLY.
Ceiling Filters are held in place by a removable filter
frame in the ceiling of the cabin. Filter support bolts
secure the filter frame. Rotate the support bolts clear
of the frame, insuring that the frame will not fall free,
and remove from the filter frame opening. Set filter
frame on stands. Remove the used filter media, and
thoroughly clean the filter frame with a tack rag.
Place the new filter media in the filter frame, tuck the
media into the ends of the frame, and then tuck the
media into the sides of the frame. Raise the filter
frame up into the filter frame opening. Rotate the
support bolts back into place and tighten by hand
making sure not to over tighten. Reset the ceiling
filter hours on the touch screen. Touch the word
CEILING FILTERS on the touch screen to access
reset. The FLAME ROD in the burner should be
replaced at this time.