![background image](http://html1.mh-extra.com/html/garland/starfire-sentry-stw286a/starfire-sentry-stw286a_installation-and-operation-manual_4101706010.webp)
Part # 4517957 Rev. 13 (02/10/11)
Page 10
OPERATION
Safety concerns
It is the responsibility of the supervisor or equivalent
person to ensure that users of this equipment wear suitable
protective clothing and draw attention to the fact that some
parts will by necessity become very hot and will cause burns
if touched accidentally.
Operation Controls
OFF
IGNITION
FULL FLAME
LOW FLAME
SOLID TOP (STW286A)
50
0
4
50
4
00
3
50
300
2
50
2
00
15
0
26
21
44
0
°F
OFF
OVEN/GRIDDLE TOP
Griddles
Griddle tops are designed to have food cooked directly on
the surface. Do not put pots or pans on the griddle surface as
this will scratch or nick the surface and will result in improper
cooking or sticking of the product. Never salt food over the
griddle since this will build up a gummy residue making it
difficult to clean.
Avoid hitting the surface of the griddle with the edge of a
spatula since this will cause nicks. The most frequently used
temperatures are 300° F (149°C) to 350°(177°C). After one
firing, the griddle plate will discolour, this is normal and will
not affect cooking performance.
Check the grease container and drain frequently during
heavy use to prevent overflow.
Preparing A New Griddle
1. Remove the protective coating on the surface using a
mild detergent.
2. Thoroughly rinse the griddle with vinegar and a water
solution (3/4 cup vinegar per quart of water) and dry.
Lighting The Griddle
NOTE: Ensure that the gas and electrical supply to the
appliance are turned “ON”. During the initial ignition cycle, air
must be purged from the gas line and thus it may take two or
three tries for ignition to occur.
Summary of Contents for Starfire Sentry STW286A
Page 27: ...Part 4517957 Rev 13 02 10 11 Page 27...
Page 28: ......
Page 29: ......