![background image](http://html1.mh-extra.com/html/garland/sh-3500-555/sh-3500-555_installation-operation-and-maintenance-manual_3679164029.webp)
Part Number 4532879 1/15
29
Section 2
Installation
COECTIG THE COMPOETS
1.
n
Warning
Ensure the control knobs are in the 0 (OFF) position
BEFORE connecting the unit to the electrical supply.
O-Position
Any position
other than
“0” is pointing
to the LED
indicator
light. The LED
is on.
OFF-Position
“0” is pointing
to the LED
indicator
light. The LED
is off.
2. Remove all objects from the glass-top and check that
the glass-top is neither cracked nor broken.
,
Caution
Do not continue if the glass-top is cracked or
broken. Contact an authorized service agency for
assistance.
3. To connect the components:
B
C
FRONT
A
D
F
E
FRONT
A. Use the RJ-45 cables provided to connect the
operation units to the built-in compact-line
module.
B. The control unit connected to the LEFT connector
will control the FRONT heating zone, as indicated
by the black solid circle on the sticker.
C. The control unit connected to the RIGHT connector
will control the REAR heating zone, as indicated by
the black solid circle on the sticker.
D. Connect a proper mains cable (not provided) to:
• L1,L2,L3: 3-Pole terminal block for 208V;
• L1,L2,L3,PE: 4-Pole terminal block for 400/440V.
E. Ground connection for voltage version 208V. Use
M6 screw.
F. Cable tie anchor. Tension relief for the mains cable.
4. Connect the mains cable from “D” to power supply.
5. To ensure the unit is working, follow instructions in
Function Test
Summary of Contents for SH 3500-555
