Garland MULE 1482 NRQG, Instruction Manual

Page: 52 / 180

English
52/180
Operation
Bef
ore each use
After
the
first
two
hours of use
Ever
y 25 hours of use
Ever
y 50 hours of use
Ever
y 100 hours
of use
Ever
y 300 hours
of use
First use of the
season
After the last use
of the season
Check that there are no loose parts •
Check the status of the milling cutters •
Check the oil level •
Change the engine oil • • • • •
Clean the air filter • • •
Check the spark plug • •
8.2.1. OIL BATH FILTER
Warning! Only in engines with an oil bath filter.
1. Remove the filter cover by unscrewing the wing nut
and washer.
2. Fill the base of the filter with clean oil SAE 10w/40
up to the mark “OIL LEVEL” (approx. 70 cc. oil).
3. Place the lid of the air filter with the washer and
wing nut.
GRILLE
CIRCULAR FILTER
BUTTERFLY NUT
AIR FILTER COVER
WASHER
OIL LEVEL
AIR FILTER BASE
OIL DEPOSIT
Note: The engine should never function without
the air filter installed.
8.2.2. CHANGING THE ENGINE OIL
Perform the oil change only while the engine is still
hot.