Garland moisture+ MPGD10D, Service Manual

Page: 26 / 80

Part # MPSM07 (03/24/08) Page 26
When the oven is in start-up, idling mode, during a cook cycle or
holding product and door switch one is sensed the heat and motor
are shut off and the display changes to tell the operator to close the
door so operation can continue .
When the oven is heating to a programmed temperature, particularly
at start-up, this message is displayed . The programmed temperature
being heated to and the actual temperature are shown (100º
minimum) . The word “HEAT” in the lower right hand corner will cycle
on and off with the burners/elements .
When programming the control for cooking cycles, this display will
be shown prompting the user to program the temperature for the
oven cavity .
When programming the control for cooking cycles, this display will
be shown prompting the user to program the time for the cook cycle
in hours, minutes and seconds .
When programming for cooking, the user selects one of six moisture
options: None; Meat; Bread; Poultry; Fish, User . The user scrolls
through the options one at a time and selects the desired moisture
option for that cook cycle .
When programming the control for cooking cycles using Cook-N-
Hold, this display will be shown prompting the user to program the
temperature for the oven cavity while in the HOLD mode .
When the oven has achieved the programmed temperature and is
idling this message is displayed . The word “HEAT” in the lower right
hand corner will cycle on and off with the burners/elements .
During a cooking cycle this display will appear . The programmed
cook temperature and actual oven temperature will be displayed on
the left side of the display . The clock in the upper right hand corner
will count down in hours, minutes and seconds the cook time . The
word “COOK” in the center of the lower row indicates the mode the
oven is in . The word “HEAT” in the lower right hand corner will cycle
on and off with the burners/elements .
When product is being held this display will appear . The programmed
hold temperature and actual oven temperature will be displayed on
the left side of the display . The clock in the upper right hand corner
will count up in hours, minutes and seconds the time the product has
been held . The word “HOLD” in the center of the lower row indicates
the mode the oven is in . The word “HEAT” in the lower right hand
corner will cycle on and off with the burners/elements .
When a cooking cycle ends the display clears, the blinking message
DONE is displayed and the audible alarm sounds .