![background image](http://html1.mh-extra.com/html/garland/gf-sentry-series/gf-sentry-series_installation-and-operation-manual_3657799011.webp)
Part # 4526026 Rev. 03 (06/12/14)
Page 11
2. Install the left and right support brackets (part # 4523226
and 4523227) by re-inserting the 2 screws removed in
step 1 and one additional screw (on both sides of the
range).
DETAIL I
INSERTED
SCREWS
3. Slide the salamander down into the support brackets
installed in step 2, see fi gure 1.
4. Once the salamander is in place, fasten it to the unit on
both sides of the range with the provided #14B x 5/8 hex
washer head tapping screws.
DETAIL I
PROVIDED
#14B x 5/8 HEX
WASHER HEAD
TAPPING SCREWS
INSTALLATION Continued
Installation Of A Salamander To A Range
NOTE: The back of the range must be easily accessible.
DETAIL
I
36" RANGE
Figure 1 – With area detail defi ned for 36 inch range.
1.
Remove screws from back of oven (on both sides of
range) as shown:
DETAIL I
REMOVE
2 SCREWS
(BOTH SIDES)
Model GFIR36 – 36” Ranges
SAFETY
FIRST
USE PROPER
LIFTING TECHNIQUES
Summary of Contents for GF Sentry Series
Page 55: ...Parte 4526026 rev 03 06 12 14 P gina 55...
Page 56: ......