11
be cleared. You will need to obtain the
unique account number from the Central
Monitoring Station and re-program.
Command 20-24
Reporting Method
z
Commands (
20-24
) are used to program
the Alarm reporting method for each Tel.
Number.
z
Command
(
20
)
:
Program the same alarm
reporting method for
all
4 Tel. Numbers.
z
Command
(
21-24
)
:
Program the alarm
reporting method for the 1
st
-4
th
Tel.
Numbers
respectively.
z
Available Options:
Method
Function
Selection
(0) Contact
ID
(1) Scancom
Digital
Reporting
Method
(2) Tunstall
Voice
Message
Reporting
Method
(3)
Play Voice
Message
Speech
Method
(4)
Open Two-way
communication
z
Factory Default for
1
st
(Command 21)
,
2
nd
(Command 22)
, and
4
th
(Command 24)
Tel. #
is set as (
0
),
Contact ID
.
z
Factory Default for
3
rd
(Command 23) Tel.
#
is set as (
4
),
Speech Method
.
<
<
N
N
O
O
T
T
E
E
>
>
)
The latest Command (
20-24
) setting(s)
will overwrite any previously entered
setting(s).
)
If any of Digital Reporting Methods
is selected:
Once alarm or emergency data is
successfully transmitted, IC2020 will
automatically enter specific Follow-On
and/or Call Back Mode as specified by
Command (
38
).
)
If Voice Message Reporting
Methode is selected:
After the dialing for alarm/emergency
trigger is successful, IC2020 will play
the pre-recorded message (see
Command #50) up to a max. length of
40 seconds. IC2020 will emit a beep
via the telephone handset, signaling
20 & 10 sec of time remaining to alert
the call Recipient.
While playing the voice message,
pressing the DTMF key can enter the
following mode for 10 minutes:
DTMF #1: enter Talk mode (only
the Call Recipient talks).
DTMF #2: enter two-way
communication mode.
DTMF #3: enter listen-in mode.
During the 10 min period, IC2020 will
emit a beep via the telephone handset
signaling 20 & 10 sec of time
remaining to alert to the call Recipient.
If the Call Recipient needs more
conversation time, press the DTMF
key (1, 2 or 3) again to add another 10
minutes.
To terminate the call, press DTMF (
9
)
or
NURSE button
on IC2020. IC2020
will start a 10-minute waiting period to
auto answer any incoming phone call.
During the voice message playing
period, if there is no any DTMF key
pressed, the call will automatically
hang-up and be recorded as an
unsuccessful call. It will retry up to a
maximum of 4 times on each Tel.
Number accordingly.
)
If Speech Method is selected:
After the dialing for alarm/emergency
trigger is successful, IC2020 opens a
two-way voice communication
between the Call Recipient and
IC2020 for 1-60 minutes (set by
Command #46).
If the Call Recipient needs more talk
time, s/he can press any keys except
9 on their phone set to add another 1-
60 minutes (set by Command #46).
To terminate the call, press (
9
)
or
