Gardsman CTC-1132, Installation & Operating Manual

Page: 30 / 48

26
2.7. SMS Keyword
For sending remote commands to control the
operation of the Receiver 1 & 2 and Outputs
using SMS message, a personalized password
is required for CTC-1132 to recognize your
authority. To set a personalized keyword
different from
Pin Code (factory default), select
SMS Keyword in Programming Main menu.
C h a n g e K e y w o r d ?
P
i n c o d e + O K
z Keyword Editor
Step 1. Press OK key to confirm.
Step 2. The next display will prompt you to
enter your preferred keyword from
minimum of 1 character to a maximum
of 10-character and press
OK key
when done.
K e y w o r d e d i t o r
. . . . . . . . . . + O K
Step 3 . The system returns to Main
Programing Menu automatically.
<
<
N
N
O
O
T
T
E
E
>
>
)
If there is no character entered, there
is no Keyword set up in the system.
)
Without Keyword programmed in the
system, Remote Commanding of
CTC-1132’s Receivers and Outputs
via SMS will also be disabled.
2.8. Country Code
The Phone Number Format displayed by each
SIM card may vary by different Telecom
companies. Thus, you have to ask your local
Telecom provider for the correct format.
Or, follow the steps below for checking your
phone number format and setting the system to
correct the format:
Step 1. Remove the SIM card from the Panel
SIM Card holder, and put it into a
workable Mobile phone.
Step 2. Activated the Mobile phone and send
a test SMS message to the same
Mobile number.
Step 3. Once the test message is received,
you can then confirm the Phone
Number Format that is applied by
your Telecom provider. Then, remove
the SIM card from the Mobile phone
and put it back to Panel’s SIM Card
holder as before.
<EXAMPLE>:
When the Mobile phone number is set as
0987654321 , it will be displayed on your phone
by either:
INCLUDE
Country Code
+886987654321
EXCLUDE
Country Code 0987654321
)
When the received Phone Number Format
INCLUDES the Country Code, the Country
Code should be replaced by “ 0 ”. Please
follow from Step 4 to Step 7.
) On the other hand, if your Phone Number
Format EXCLUDES the Country Code,
then, you are not required to do any
changes.
Step 4. Putting the Control Panel into
Programming Menu and select the
Country Code option, and press OK
key. The display will then show:
C o u n t r y C o d e
. . . . . . . . . . . . . . . .
Step 5. You can now edit your Country Code.