![background image](http://html1.mh-extra.com/html/gardner-denver/vs-11/vs-11_operating-and-service-manual_3888942056.webp)
13-18-606 Page 55
5. Remove four bolts (7) securing valve body to compressor body and remove valve.
6. Inspect poppet seal (o-ring) (5) for wear and tear. Replace, if necessary.
7. In case of noted malfunction (e.g., valve will not open/close properly with good air signal),
proceed to dismantle internal blow-off valve.
•
Carefully lift and remove poppet (3).
•
Remove lock ring (13).
•
Pull cover (9) and inspect seals (10 & 11) for wear and tear. Replace if necessary.
•
Re-assemble blow-off valve in reverse order.
8. Reassemble inlet control valve in reverse order.
Summary of Contents for VS-11
