![background image](http://html1.mh-extra.com/html/gardner-denver/vs-11/vs-11_operating-and-service-manual_3888942037.webp)
13-18-606 Page 36
Use of improper lubricants will cause damage to equipment. Do not mix
different types of lubricants or use inferior lubricants.
All materials used in Gardner Denver compressor units are compatible with
AEON 9000SP Synthetic Lubricating Coolant. Use caution when selecting
downstream components such as lubricating bowls, gaskets and valve trim.
AEON 9000SP Synthetic Lubricating Coolant is not compatible with Nitrile
(Buna N) or acrylic paints. AEON 9000SP is compatible with most air system
downstream components.
Material Safety Data Sheets (MSDS) are available for all AEON lubricants from your authorized Gardner Denver
distributor or by calling 217-222-5400.
MOISTURE IN THE OIL SYSTEM -
The oil mixing valve provided with your compressor package has been
designed to avoid water vapor condensation during all modes of operation (e.g., load level, ambient temperature
or relative humidity and discharge pressure). See “Oil Mixing Valve” notes within this section for further details on
this device.
This feature does not eliminate the need to analyze the lubricating oil frequently. If an analysis reveals the
presence of water in the oil, it may indicate that the oil mixing valve is malfunctioning. Contact your authorized
Gardner Denver factory distributor for assistance.
OIL SIGHT GLASS
- This device indicates oil level within the air/oil reservoir. Check oil level only with the
compressor running. Normal oil level is the area between “min” and “max” marks. Add oil only when oil level has
reached the “min” mark. Drain oil only when the oil level has exceeded the “max” mark.
C
C
C
A
A
A
U
U
U
T
T
T
I
I
I
O
O
O
N
N
N
C
C
C
A
A
A
U
U
U
T
T
T
I
I
I
O
O
O
N
N
N
Summary of Contents for VS-11
