DISASSEMBLY
STEP 1.
Clean loose dirt from the outside of the compressor.
STEP 2.
Unscrew the 6 head screws (1-discard screws) and remove
the compressor head (2).
STEP 3.
Carefully remove the valve plate (4) from the bottom of the
head. Remove the head gasket O-ring (3) and discard it. Clean head
with a soft, clean cloth and set aside for re-assembly later in the repair
process.
STEP 4.
Turn the valve plate over. Remove the valve plate O-ring and
discard it.
STEP 5.
Remove the 4 screws (6) securing the plastic front cover (5),
and pull cover off. Retain screws and cover for reassembly.
1
Figure 1
1
5
3
4
6
2