background image

13-21-615 v01     Page 82 

 

 
 

Standard Warranty 

Electra Saver II and Electra Saver Series 

 

Gardner Denver 

(the “Company”) warrants to each original retail purchaser (“Purchaser”) of its new products from the 

Company or its authorized distributor that such products are, at the time of delivery to the Purchaser, free of defects in 
material and workmanship. 

 

STANDARD WARRANTY PERIOD 

The 

Company’s obligation under this warranty is limited to repairing or, at its option, replacing, during normal business 

hours at an authorized service facility of the Company, any part which in its judgment proved not to be as warranted 
within the applicable warranty period as follows. 

Regular maintenance in accordance with the service manual is 

required. Use of genuine Gardner Denver OEM parts and lubricants are highly recommended. If a component 
failure  is  deemed  a  result  of  using  non-genuine  Gardner  Denver  parts  and  lubricants,  warranty  will  not  be 
allowed. 

COMPONENT 

STANDARD WARRANTY COVERAGE 

DETAILS 

Package 

12 months 

from startup or 

15 months 

from date of 

shipment to first purchaser, whichever occurs first 

All components within the package, excluding normal wear 
items 

 

Airend 

 

24 months 

from startup or 

27 months 

from date of 

shipment to first purchaser, whichever occurs first 

Normal wearing items, such as shaft seals and inlet valve 
components, along with the servicing of these items is not 
covered under the warranty unless deemed as material or 
workmanship  defects.  Any  disassembly  or  partial 
disassembly  of  the  airend,  or  failure  to  return  the 
“unopened”  airend  per  Company  instructions,  will  be 
cause for denial of warranty 

Electric 

Motors 

12 months 

from startup or 

15 months 

from date of 

shipment to first purchaser, whichever occurs first 

Includes both drive motor and cooling fan motor. For 
nonstandard motors, the original manufacturer’s warranty 
will take precedence. 

Major 

Package 

Components 

24 months 

from startup or 

27 months 

from date of 

shipment to first purchaser, whichever occurs first 

Includes package controller, variable frequency drive if 
applicable, air/oil reservoir, air/oil cooler, and precision 
mixing valve (VS Series) 

 
 
 
 
 

Labor 

 

 

Package / Electric Motors: 12 months 

from startup 

or 

15  months 

from  date  of  shipment  to  first 

purchaser, whichever occurs first 

 

Airend / Major Package Components: 24 months 

from startup or 

27 months 

from date of shipment to 

first purchaser, whichever occurs first 

Service  will  be  provided  by  Company  representative  or 
authorized service  personnel,  for  repair  or replacement  of 
any product or part which in the Company’s sole judgment 
is proved not to be as warranted. Labor shall be limited to 
the  amount  specified  in  the  Company’s  labor  rate 
schedule. All costs of transportation of product, parts, and 
repaired  or  replacement  parts  claimed  not  to  be  as 
warranted  to  and  from  such  service  facilities  shall  be 
borne  by  the  Purchaser.  The  Company  may  require  the 
return of any part claimed not to be as warranted to one of 
its  facilities  as  designated  by  Company,  transportation 
prepaid  by  Purchaser,  to  establish  a  claim  under  this 
warranty. Replacement parts provided under the terms  of 
the  warranty  are  warranted  for  the  remainder  of  the 
Warranty Period. 

NO WARRANTY IS MADE WITH RESPECT TO: 

1.

 

ANY PRODUCT WHICH HAS BEEN REPAIRED OR ALTERED IN SUCH A WAY, IN THE COMPANY’S 
JUDGMENT, AS TO AFFECT THE PRODUCT ADVERSELY 

2.

 

ANY PRODUCT WHICH HAS, IN THE COMPANY’S JUDGMENT BEEN SUBJECT TO NEGLIGENCE, 
ACCIDENT, IMPROPER STORAGE, OR IMPROPER INSTALLATION OR APPLICATION 

3.

 

ANY PRODUCT WHICH HAS NOT BEEN OPERATED OR MAINTAINED IN ACCORDANCE WITH THE 
RECOMMENDATIONS OF THE COMPANY 

4.

 

ANY RECONDITIONED OR PRIOR OWNED PRODUCT 

STANDARD WARRANTY DISCLAIMER 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IT IS EXPRESSLY AGREED THAT, EXCEPT AS TO TITLE, THE COMPANY MAKES NO OTHER 
WARRANTIES AND HEREBY EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION, EXPRESSED, IMPLIED 
OR STATUTORY WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. THE 
REMEDY PROVIDED UNDER THIS WARRANTY SHALL BE THE SOLE, EXCLUSIVE AND ONLY REMEDY AVAILABLE TO PURCHASER AND IN 
NO  CASE  SHALL  THE  COMPANY  BE  SUBJECT  TO  ANY  OTHER  OBLIGATIONS  OR  LIABILITIES.  UNDER  NO  CIRCUMSTANCES  SHALL  THE 
COMPANY  BE  LIABLE  FOR    SPECIAL,    INDIRECT,    INCIDENTAL    OR    CONSEQUENTIAL    DAMAGES,    EXPENSES,    LOSSES    OR    DELAYS 
HOW  SOEVER  CAUSED.  NO  STATEMENT,  REPRESENTATION,  AGREEMENT,  OR  UNDERSTANDING,  ORAL  OR  W  RITTEN,  MADE  BY  ANY 
AGENT,  DISTRIBUTOR,  REPRESENTATIVE,  OR  EMPLOYEE  OF  THE  COMPANY  W  HICH  IS NOT  CONTAINED  IN THIS  WARRANTY  WILL  BE 
BINDING UPON THE COMPANY UNLESS MADE IN W RITING AND EXECUTED BY AN OFFICER OF THE COMPANY. THIS WARRANTY SHALL 
NOT BE EFFECTIVE AS TO  ANY CLAIM W HICH IS NOT PRESENTED WITHIN 30 DAYS AFTER THE DATE UPON WHICH THE PRODUCT IS 
CLAIMED NOT TO HAVE BEEN AS WARRANTED. ANY ACTION FOR BREACH OF THIS WARRANTY MUST BE COMMENCED WITHIN ONE YEAR 
AFTER THE DATE UPON WHICH THE CAUSE OF ACTION OCCURRED. ANY ADJUSTMENT MADE PURSUANT  TO  THIS WARRANTY SHALL 
NOT  BE  CONSTRUED  AS  AN  ADMISSION  BY  THE  COMPANY  THAT  ANY  PRODUCT  WAS  NOT  AS  WARRANTED.  WARRANTY  IS  NOT 
TRANSFERRABLE.

 

Summary of Contents for SAVG2-100





















































































Reviews: