![background image](http://html1.mh-extra.com/html/gardner-denver/savg2-100/savg2-100_installation-operating-and-service-manual_563821032.webp)
13-21-615 v01 Page 31
Clearing Alarms
If there are any faults present on the machine, they must first be cleared to allow the machine to be started. If the
machine has been powered on recently and Auto Restart is not enabled, a Power Loss fault will be present.
If a fault is active on the machine, the Active Alarms screen can be accessed by pressing on the Alarm triangle on
the Message Status Bar on the Home screen, or by navigating to Alarms -> Active Alarms through the Menu. The
Active Alarms screen is shown in
Figure 3-9: Active Alarms Screen
If the alarm icon in the Alarm column is an outline, as shown in
, the alarm is no longer active and may
be reset. If the alarm icon is solid (
), the fault is still active and the condition must be resolved before it can be
cleared.
Once all faults have been resolved, press the
Reset All
button, which will move the alarms to the Alarm History
screen. Once all faults have been reset, return to the Home screen.