![background image](http://html1.mh-extra.com/html/gardner-denver/savg2-100/savg2-100_installation-operating-and-service-manual_563821033.webp)
13-21-615 v01 Page 32
Jogging the Motors
If this is the first time that the machine has been started after being connected to power, the motors must be jogged
to verify correct rotation. To do this, you must be logged in as a Technician. After logging in, navigate to
Diagnostics -> Jog Motors. The Jog Motors screen is shown in
Figure 3-10: Jog Motors Screen
Select the desired jog duration and select Compressor Motor or Fan Motor from the dropdown as shown. You will
need to jog both individually to verify correct rotation. The Jog Delay field allows you to delay the start of the jog
from the time that you press the
Start Jog
button. This is to allow you time to get into a position to view the rotation
before the motor is started. Note that the controller will only allow one jog every 10 seconds and will disable the
Start Jog
button during this time period.
After correct rotation has been verified, return to the Home screen and proceed to operate the compressor.
Operating the Compressor
The compressor is now ready to operate. This section gives a basic overview of how to operate the machine.