![background image](http://html1.mh-extra.com/html/gardner-denver/apex15-18a/apex15-18a_operating-and-service-manual_3575531064.webp)
13-25-607 Page 62
MAINTENANCE SCHEDULE (See Detail Notes above)
Maintenance Action
As Indicated
by AirSmart
Controller
Every
8
Hours
Every
50
Hours
Every
125
Hours
Every
1000
Hours
Every
4000
Hours
Every
Year
Check/Change Air Filter ..............................................
·
Check/Change Package Inlet Filters ............................
·
Change Oil Separator ................................................
·
·
Check Reservoir Oil Level
**
.......................................
·
Check for Proper Load/Unload ....................................
·
Check Dirt Accumulation on Cooler .............................
·
Change Oil Filter Element & Clean Oil Return Orifice ...
·
Change Compressor Lubricant (AEON 4000)
*
............
·
Check Relief Valve .....................................................
·
Check Condition of Hoses ...........................................
·
·
Check Operation of Condensate Removal Drain Valve
·
*
See
“Oil Change Interval Chart”, Figure 5 - 4 page 41, for specific lubricant life.
**
Must be checked when the compressor is stopped and the air/oil mixture is separated.
Summary of Contents for APEX15-18A
