![background image](http://html1.mh-extra.com/html/gardner-denver/apex15-18a/apex15-18a_operating-and-service-manual_3575531019.webp)
13-25-607 Page 17
Line Reactor -
A line reactor provides conditioning of the electrical power supply to the compressor
package by attenuating noise and fluctuations. Is shall be required in your particular application if any of
the following conditions exist:
·
Transformer KVA is greater that recommended - see Figure 2 - 5
·
Line has switched Power Factor correction capacitors.
·
Existing line reactor is not properly sized - see Figure 2 - 5
·
Other large loads share the power feed to the compressor package.
GD Model
Voltage
VFD kW Rating
Max KVA
VS15 / VS18
575
15 / 18
Consult factory
"
460
15 / 18
Consult factory
"
380
15 / 18
Consult factory
"
230
15 / 18
Consult factory
Figure 2 - 5 - Line Reactor Sizing
GROUNDING
- Equipment must be grounded in accordance with Section 250 of the National Electrical
Code.
Failure to properly ground the compressor package could result in injury or
death. Install ground wiring in accordance with the National Electrical Code
and any applicable local codes.
MOTOR LUBRICATION
- The Hebei type H160-2 motors used with this compressor package have
sealed bearings which have been greased at the factory and require no re-greasing during their
operational life. These motors do not have injection or drain ports for re-greasing.
Summary of Contents for APEX15-18A
