Gardens Best Niro GB 1300 HWWS, Manual

Page: 18 / 148

17
b. Do not use any power tool with a defective switch. An electrical tool that can
no longer be switched on and off is dangerous and must be repaired.
c. Unplug the device from the power outlet and/or remove the battery before
making device settings, changing accessories, or putting the device away. This
precautionary measure prevents the device from starting up unintentionally.
d. When not in use, store power tools out of the reach of children. Do not allow
persons to use the device who are unfamiliar with the device or who have not
read these instructions. Power tools are dangerous when used by inexperienced
persons.
e. Take good care of the device. Ensure that moving parts of the device function
properly and do not seize, if parts are broken or are damaged, then device func­
tion is impaired. Have the damaged parts repaired before using the tool. Many
accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp
cutting edges seize less and are easier to control.
g. Use power tools, accessories, insertion tools etc. according to these instructions,
and in the manner prescribed for this particular device type. Give due consider­
ation to work conditions and the task that will be executed. Using power tools for
applications other than their intended use can lead to dangerous situations.
h. Hold the appliance by the insulated grip surfaces when performing work in
which the insertion tool can hit concealed power supply lines or its own power
cable. Contact with live lines can also charge metallic tool parts and lead to an elec-
tric shock.
5. Safety instructions for domestic water pumps
a. Please read the operating instructions carefully and observe them. Use these operating
instructions to familiarise yourself with the device, its correct handling as well as the
safety notices.
The pump is not suited for permanent operation (e.g. as circulating pump
in ponds or brooks). This kind of operation reduces the service life
accordingly. In such cases, use a timer and ensure sufficient down times
between the operating cycles.
The pump may not be connected to the water net in order to raise the
pressure.
1197972 BDA GB 1300 HWWS.indd 17 14.09.12 09:28