![background image](http://html1.mh-extra.com/html/gardenline/glls-3002-uk/glls-3002-uk_user-manual_3526447020.webp)
Use
20
Picking up the blower vac
1. Hold the handle
3
with one hand and the extra handle
1
/
27
with the other
hand.
2. Put on the carrying strap
28
so that it runs over your shoulder and crosses your
chest and back.
3. Attach the carrying strap with the hook to the eyelet for the carrying strap
2
/
4
.
4. Adjust the belt length so that the lower suction tube
9
or blower tube
25
can
be guided just above the floor.
In suction mode, the guide rollers
8
are used to guide the suction tube more
easily over the floor.
Setting the speed
− To increase power, turn the speed control
11
clockwise corresponding to the
mark.
− To reduce power, turn the speed control anticlockwise corresponding to the mark.
Activating/deactivating the blower vac
CAUTION!
Risk of injury!
Moving parts will continue to move and can cause injury if touched before they
have come to a full stop.
− Wait until all moving parts have come to a full stop.
− To switch the blower vac on, set the On/Off switch
12
to the On position (
I
).
− To switch the blower vac off, set the On/Off switch to the Off position (
o
).
Using the blower vac in vacuum mode
CAUTION!
Risk of injury!
If the collector bag is not secured during operation in vacuum mode, projected
parts could inflict injury.
− Only use the blower vac in vacuum mode with a properly mounted
collector bag.
− Make sure that the collector bag is not damaged.