First use
17
First use
Checking the blower vac and package contents
WARNING!
Danger of suffocation!
Children could suffocate on plastic wrappers or if they swallow small parts.
− Do not allow children to play with the plastic bags, wrappers and small
parts. The blower vac and the packaging are not a children’s toy.
1. Lift the blower vac out of the packaging with both hands.
2. Place the blower vac on a level, stable surface, such as a workbench.
3. Check whether the blower vac or the individual parts exhibit damage. If this is the
case, do not use the blower vac. Contact the manufacturer at the service address
specified on the warranty card.
4. Check to make sure that all parts are included (see
Fig. A
–
H
).
Assembling the blower vac
WARNING!
Risk of injury!
A blower vac that is not fully assembled may result in severe injury.
− Follow the user manual step-by-step.
− Assemble the blower vac completely before operating it.
− Do not connect the mains plug with the mains connection line until you
have completely assembled the blower vac.
Assembling the suction tube
1. Put the upper suction tube
10
and the lower suction tube
9
together (see
Fig. C
).
2. Make sure that the guide nose is inserted into the corresponding recess and that
both tubes correctly snap onto each other.
3. Slide the guide rollers
8
onto the lower suction tube while holding down the
lock button
23
and allow them to snap into the desired position.
You can adjust the position of the guide rollers by pressing the lock button again and
snapping them into the desired position.
