background image

Noise/vibration information

27

Noise/vibration information

 

WARNING!

Health hazard!

Working without ear protection and suitable protective clothing poses a health 

hazard.

 

− Wear ear protection and suitable protective clothing when working with 

the device.

Measured in accordance with DIN EN 50636-2-100. The noise at your workplace may 

exceed 70 dB(A); protective measures are necessary in this case (wear suitable ear 

protection).

•  Measured sound pressure level L

pA

:

89,3 dB(A)

•  Uncertainty K

pA

:

3,0 dB(A)

•  Measured sound power level L

WA

:

107,22 dB(A)

•  Uncertainty K

WA

:

2,25 dB(A)

•  Guaranteed sound power level L

WA

:

110 dB(A)

The aforementioned values are noise emission values and therefore, do not 

necessarily represent safe values for the workplace. The correlation between 

emission and imission levels cannot reliably provide for a conclusion as to whether 

additional precautionary measures are necessary or not.
Factors that could affect the respective immission level present at the workplace 

involve the specification of the work area, the surrounding area, the duration of 

exposure, other noise sources etc. 
You must also observe any divergences in national regulations with respect to the 

permissible workplace levels. The aforementioned information does, however, allow 

the user to better assess dangers and risks.
Hand-arm vibration measured on the back handle a

hw

:

9,8 m/s²

Uncertainty K:

1,5 m/s²

Summary of Contents for GLLS 3002 UK
































Reviews: