Use
19
− Only use the blower vac in vacuum mode with a properly mounted
collector bag.
− Make sure that the collector bag is not damaged.
1. Open the star screw
14
and fold the cover
15
into an open position.
2. Hang the assembled suction tube from the fixation for the suction tube
24
and
fold it onto the motor housing
5
(see
Fig. D
).
3. Fix the suction tube with the wing screw
21
.
4. Insert the collector bag
6
into the mounting on the motor housing
17
so that it
snaps into position correctly.
5. Fix the collector bag with the two hooks
7
in the eyelets on the suction tube
22
.
Using the carrying strap
− When using the blower vac both in blowing and suction modes, always wear the
carrying strap
28
so that you can work without getting tired (see
Fig. G
and
H
).
The carrying strap is equipped with a click fastener in order to be able to release it
quickly in the event of an accident.
Use
Preparing the blower vac
Preparing the mains cord
1. Lay out the mains cord in loops so that you can drag it along when working.
2. Lay the mains cord so that it does not pose a tripping hazard and nothing can fall
on it.
3. Check that the mains cord is undamaged. Do not use a damaged mains cord
under any circumstances.
Connecting the mains cord
1. Make sure that the On/Off switch
12
is in the Off position (
o
).
2. Insert the plug of the mains cord in a properly installed socket.
Since the blower vac already has a 10 m long power cord, the strain relief
13
is not
required.