AFTER SALES SUPPORT
29
1300 855 831
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
MODEL: Garden 5 in 1 Petrol Tool PRODUCT CODE: 58903 03/2019
AUS
Attachment and operation
9.1 Mounting the Cutting Blade / Edger Attachment
C4 C5
C3
C2
C6
C2
C3
D1
10
C1
C7
•
Insert the Allen key (D1) as far as possible into the bore (C7), push lightly and rotate
back and forth a little together with the inner flange (C1) until the shaft is blocked.
•
Fit Spark plug wrench (10) onto nut (C5).
•
Turn nut (C5) clockwise (left-hand thread) and remove it.
•
Remove the outer flange (C3) and flange cover (C4).
•
Position the cutting blade (C2) on the thrust plate (C6) at the inner flange (C1).
m
Warning! The collar (arrow) must engage the hole in the cutting blade.
•
Fit the outer flange (C3) and flange cover (C4) on the shaft and block the shaft.
•
Screw nut (C5) anti-clockwise onto shaft and tighten.
m
Warning! Nut (C5) is self-locking. Always be sure that nut is fitted firmly!
OPERATION
When working with the equipment as Grass trimmer and Brush cutter, the appropriate
Protection shield (Brush Grass trimmer) (26) for Cutting blade mode or cutting
line mode must be fitted to prevent objects being thrown out by the equipment.
Filling with petrol
m
Danger of injury! Petrol is explosive!
Use only a mixture of unleaded petrol (without ethanol) and special 2-stroke engine oil.
Turn the motor off and let the 5 in 1 Petrol Tool cool down.
Wear safety gloves.
Avoid contact with skin and eyes.
Make sure you observe the "General Safety Warnings" paragraph.
• Only ever refuel the 5 in 1 Petrol Tool outdoors or in sufficiently ventilated rooms.
• Clean around the filling area. Contaminants in the Petrol reservoir (5) will cause oper-
ating problems.
