S
U
A
1800 909 909
www.powertoolsupport.com email: [email protected]
AFTER SALES SUPPORT
43668
23
Replacing the blade
Note.
Before making any adjustment or maintenance
procedures to the mower ensure it is turned off and the spark
plug lead is removed.
Note.
Wear heavy gloves to protect your hands.
1. Tilt the mower back so the spark plug is facing up and
disconnect the spark, by pulling spark plug cover off.
2. Holding the blade with gloves on, use a spanner to undo the
blade bolt.
3. Remove the blade, be careful not to slide the blade adaptor off
and dislodge the key on the shaft.
4. Clean dirt and grass from around the blade mounting area.
5. Replace the blade, hold on the adaptor whilst tightening the
blade bolt.
IMPORTANT.
Ensure the two drive lugs on the adaptor are engaged in the two
holes in the blade.
6. Tighten the blade bolt tightly (50-59Nm).
NOTE.
If your blades becomes worn, replacements are available for
purchase. Please refer to page 27 for further detail.
6
Maintenance