manualshive.com logo in svg

Gardenline 43668, User Manual, Page: 15 / 28

Share
Download
Gardenline 43668 User Manual Download Page 15

S 

U 

A 

1800 909 909 

www.powertoolsupport.com      email: [email protected]

AFTER SALES SUPPORT 

  43668

15

4

Unpacking 

Due to modern mass production techniques, it is unlikely that your petrol lawn 

mower is faulty or that a part is missing. If you find anything wrong, do not 

operate the tool until the parts have been replaced or the fault has been rectified. 

Failure to do so could result in serious personal injury. 

Contents of carton 

•  2 x Upper Handle Bar locking Knobs (including bolts x 2) and two plastic curved washers.
•  2 x Lower Handle locking Bolts and Knobs and two plastic curved washers.   
•  Spark plug spanner    •  45L Hard catcher

Assembly

 WARNING: 

 Stop the engine and unplug the spark plug before any repairs or 

maintenance operations.  

 WARNING: 

  DO NOT attempt to start this mower without first adding 0.4L of SAE 

10W/30 engine oil to the Engine. Refer Page 17.

 WARNING: 

  Do Not attempt to start this mower without the mower first being 

FULLY assembled. 
It is necessary to fit the lower handle (2), handle bar (1), and catcher (5) to the mower. 

Attaching the handles

It is necessary to attach both the lower handle and handle bars.

1. To attach the lower handles, first remove the two lower handle 

bar locking knobs. Place the lower handle in position by 

aligning the 2 lower handle ends on the inner side of the metal 

mounting plates located at the back of the mower deck.

2. Once in position, insert the bolt on each side through the 

lower handle (1) and then through the mounting plate (19).   

Orientate the bolt so the head sits correctly in the depression 

in the handle tube.

3. Once the bolts are loosely in position, fit 

the plastic curved washer over the end of 

the bolt. Then attach the lower handle bar 

locking knobs (2) over the plastic curved 

washer and secure by turning clockwise  

until tight and secure.

Getting Started

1

2

3

Summary of Contents for 43668





























Reviews:

No comments