S
U
A
1800 909 909
www.powertoolsupport.com email: [email protected]
AFTER SALES SUPPORT
43668
19
5
WARNING.
Never attempt to refuel the engine while it is
running or still warm, allow it to cool before fuelling.
Starting the engine
Note.
Before starting the mower check the oil and fuel levels.
Warranty will be void if the engine becomes faulty due to
insufficient oil and fuel levels.
Ensure the mower is set to the highest
height setting so the blades are not
resting deep into the grass.
1. Press the area of the switch marked “I” for
the ON position.
2. Depress the priming bulb (17) fully 2-3
times.
3. Pull the recoil starter (9) lightly until you feel resistance then pull
quickly until the engine starts.
Do not pull the cord with a jerk or release it until fully rewound.
Speed Control.
The speed of this motor is pre set at the factory and will
automatically maintain the motor speed during operation.
There is NO speed adjustment.
Stopping the engine
To Stop the lawn mower motor, press the area of the switch marked “O” fully.
EMERGENCY STOPPING
In the event the ON /Off switch does not stop the motor, the following processes
will assist.
NEVER move the mower, or attempt to move the mower if the controls DO NOT
turn off the motor. DO NOT attempt to lift or tip the mower on its side.
In the event the OFF switch does not turn off the motor, press the primer bulb
fully 4 or 5 times quickly. The motor should stop.
If this fails to stop the motor, remove the spark plug cap from the spark plug.
Instructions