background image

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

6/12/2007

FORM NO. 769-02570A

Safety • Assembly • Operation • Maintenance • Troubleshooting • Parts Lists • Warranty

Warning: 

This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-

covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). 
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law 
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester 
for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, 
Ohio 44136-0019.

PRINTED IN U.S.A.

READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION

IMPORTANT

OPERATOR’S MANUAL

Yard Vacuum/Chipper/Shredder with Vacuum/Hose 

Model Series 060

Summary of Contents for Z-Force S Commercial 60









































Reviews: