68 - English
8. MAINTENANCE
Replacing the battery
If the operating times for the robotic lawnmower are
shorter than normal between charges, this indicates
that the battery is getting old and eventually needs
replacing. The battery is fine as long as the robotic
lawnmower maintains a well-cut lawn.
1.
Set the main switch in position
0
.
2.
Lower the cutting height to its lowest position.
3.
Turn the robotic lawnmower upside down. Place
the robotic lawnmower on a soft and clean
surface to avoid scratching the body and the
display cover.
4.
Clean around the battery cover.
5.
Unscrew the four screws to the battery cover
(Torx 20) and remove the battery cover.
6.
Pull out the battery by pulling on the strap.
7.
Fit a new original battery.
NOTE! Press on the contact strip to fit the battery
in place and not on the battery pack itself.
8.
Fit the battery cover. If the seal on the battery
cover is visibly damaged, the entire battery cover
must be replaced.
9.
Screw in place the four screws for the battery
cover (Torx 20).
10. Reset the cutting height to the required level.
IMPORTANT INFORMATION
Fully charge the battery at the end of the
season before winter storage.
IMPORTANT INFORMATION
Always use original batteries. Compatibility
with other batteries cannot be guaranteed.
1157069-26,R40Li_GB.book Page 68 Wednesday, November 19, 2014 5:02 PM
Summary of Contents for R38Li
Page 2: ......