34 - English
3. INSTALLATION
3.7 Checking the loop
Check the loop signal by inspecting the indicator
lamp on the charging station.
See
9.2 Indicator lamp in the charging station
on
page 72 if the lamp does not indicate a solid green
light.
3.8 First start-up and calibration
Before the robotic lawnmower is operated, a start-up
sequence in the robotic lawnmower's menu must be
carried out as well as an automatic calibration of the
guide signal. The calibration is also a good test to see
that the installation of the guide wire has been done
in such a way that the robotic lawnmower can easily
follow the guide wire from the charging station.
1.
Open the control panel cover by pressing the
STOP
button.
2.
Set the main switch to position
1
.
A start-up sequence begins when the robotic
lawnmower is started for the first time. The
following is requested:
• Language
• Country
• Time format
• Current time
• Date format
• Date
• Four digit PIN code. All combinations except
0000 are permitted.
3.
Place the robotic lawnmower in the charging station as requested in the display.
Press the START button and close the cover. The robotic lawnmower will now start
the guide calibration, by leaving the charging station and following the guide wire to
the point where the guide wire is connected to the boundary wire to begin mowing
there. Check that the robotic lawnmower can follow the guide wire all the way.
If it cannot, this may be due to an incorrectly installed guide wire. In this case, check
that the installation is performed as described in
3.6 Installation of the guide wire
on
page 30. Then carry out a new calibration. See
6.6 Settings
on page 54.
In the case of the R70Li/R80Li, it is also possible to reduce the guide width for the
robotic lawnmower to follow the guide wire through very narrow passages.
See
6.4 Installation, R70Li, R80Li
on page 49. Use the Test out function to carry out a
new calibration in the R70Li/R80Li. See
6.4 Installation, R70Li, R80Li
on page 49.
IMPORTANT INFORMATION
Use
Memo
on page 4 to make a note of the
PIN code.
1157069-26,R40Li_GB.book Page 34 Wednesday, November 19, 2014 5:02 PM
Summary of Contents for R38Li
Page 2: ......
