English - 39
4. USE
4.5 Switching off
1.
Press the
STOP
button.
2.
Set the main switch in position
0
.
Always switch the robotic lawnmower off using the
main switch if it requires maintenance or if the robotic
lawnmower must be moved outside the working area.
4.6 Adjusting the cutting height
The cutting height can be varied from MIN (2 cm) to
MAX (5 cm).
To adjust the cutting height:
1.
Press the
STOP
button to stop the robotic
lawnmower and open the cover.
2.
Turn the height adjustment knob to the required
position. The selected position is indicated by the
orange column that can be seen by the knob
through the window.
• Turn anti-clockwise to raise the cutting height.
• Turn clockwise to lower the cutting height.
IMPORTANT INFORMATION
During the first week after a new installation,
the cutting height must be set to MAX to
avoid damaging the loop wire. After this, the
cutting height can be lowered step by step
every second week until the desired cutting
height has been reached.
Start
1
1
2
3
4
5
4
7
8
0
9
5
6
2
3
1157069-26,R40Li_GB.book Page 39 Wednesday, November 19, 2014 5:02 PM
Summary of Contents for R38Li
Page 2: ......
