52 - English
6. MENU FUNCTIONS
Test settings
In the
Test settings
menu, it is possible to test the
settings for
Remote start 1
and
Remote start 2
and
that the selected
Guide width
works in the working
area in question.
Test
OUT
The
Test OUT
function is used to test if the selected
Guide width
suits the installation in question and to
calculate the distance from the charging station to a
remote area.
To test the settings in
Remote start 1:
Park the robotic lawnmower in the charging station
and select
Test OUT - Remote start 1
. The robotic
lawnmower will then leave the charging station straight
away along the guide wire and begin mowing after the
designated distance.
If there is a passage that the robotic lawnmower
cannot get through, the settings in
Guide width
ought
to be changed from
Wide
to
Medium
. If required, the
setting can also be changed to
Narrow
. The Narrow
guide width setting should only be used if none of the
other settings work for this installation. When the
Test
OUT
function is activated, the robotic lawnmower
travels the farthest distance from the wire allowed by
the selected guide width.
The figure here shows how the robotic lawnmower
travels through a passage when
Guide width
is set to
Medium
and not to
Wide
.
How to measure the distance from the charging
station to a remote area:
Enter a distance which beyond any doubt exceeds the real
figure. The maximum distance that can be entered is 100
metres. Park the robotic lawnmower in the charging station
and select
Test OUT
. The robotic lawnmower will immediately
leave the charging station. The distance, stated in metres, will
be shown in the mower display as the robotic lawnmower
operates. Stop the robotic lawnmower at the required position
and note the distance. Enter the displayed number of metres in
the
Distance
field for the working area in question.
If
Remote start 2
has been activated, i.e. if another option
other than
Never
has been selected for
Proportion
, these
settings must also be tested.
Remote start 2
test is performed
in the same way as for
Remote start 1
.
Test IN
Test OUT
Guide width
Remote start 1
Remote start 2
Test settings
Drive past wire
Remote start 1
Remote start 2
Test IN
Test OUT
1157069-26,R40Li_GB.book Page 52 Wednesday, November 19, 2014 5:02 PM
Summary of Contents for R38Li
Page 2: ......
