66 - English
8. MAINTENANCE
Body
Use a damp, soft sponge or cloth to clean the body. If
the body is very dirty it may be necessary to use a
soap solution or washing-up liquid.
Charging station
Clean the charging station regularly from grass,
leaves, twigs and other objects that may impede
docking.
8.4 Transport and removal
Secure the machine during transport. It is important
that the robotic lawnmower does not move when it is
being transported, for instance, between lawns.
The contained lithium-ion-batteries are subject to the
Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on packaging
and labeling must be observed.
For preparation of the item being shipped, consulting
an expert for hazardous material is required. Please
also observe possibly more detailed national
regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move around
in the packaging.
8.5 In the event of a thunderstorm
To reduce the risk of damage to electrical
components in the robotic lawnmower and its
charging station, we recommend that all connections
to the charging station are disconnected (power
supply, boundary wire and guide wires) if there is a
risk of a thunderstorm.
1.
Make sure the wires are marked with the
supplied markers to simplify reconnecting. The
charging station’s connections are marked AR,
AL, Guide.
2.
Disconnect all wires.
3.
Close the cover to the charging station to protect
the connections from rain.
4.
Connect all the wires if there is no longer arisk of
thunder. It is important that each wire is
connected to the right place.
1157069-26,R40Li_GB.book Page 66 Wednesday, November 19, 2014 5:02 PM
Summary of Contents for R38Li
Page 2: ......
