8
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
3
2. Attach the wire guard assembly (G) to
the housing assembly (H) using short
bolts (CC).
3. Place black silicone ring (F) to the bottom of
glass tube (E). Insert glass tube into the
preassembled wire guard assembly (G), then
tighten the glass cap (D) onto the wire guard
assembly (G) with the short bolts (DD).
2
Short Bolt
x 4
4. Attach the emitter assembly (C) to the
wire guard assembly (G) with long bolts
(BB) as shown, leaving the bolts
protruding above the surface. Attach the
top wire guard (B) to the wire guard
assembly (G), and then tighten the long
bolts (BB).
4
x 4
Long Bolt
Short Bolt
x 2
