background image

 

5

HARDWARE CONTENTS                                                                                                                     

 

 
               
 

 

 

 

 
 
 
 
 
PREPARATION                                                                                                                                                 

 

Before beginning assembly of product, make sure all parts are present. Compare parts with package 
contents list and hardware contents list. If any part is missing or damaged, do not attempt to 
assemble the product. 
 

Estimated Assembly Time: 20 minutes. 

Tools Required for Assembly: Phillips screwdriver (not included)

 

 
 
 

 

SAFETY INFORMATION                                                                                                                             

 

Please read and understand this entire manual before attempting to assemble, operate or install the 
product.  
 

·

  CALIFORNIA PROPOSITION 65 WARNING:   

(a) Chemicals known to the state of California to cause cancer, birth defects or other reproductive 

harm are created by combustion of propane. 

(b) Handling the brass material on this product exposes you to lead, a chemical known to the 

state of California to cause cancer and birth defects or other reproductive harm. Wash hands 
after handling. 

·

  The installation must conform with local codes or, in the absence of local codes, with the National 

Fuel Gas Code, ANSI Z223.1 /NFPA 54, Natural Gas and Propane Installation Code, CSA 
B149.1, or Propane Storage and Handling Code, B149.2. 

 

DANGER

 

 

·

  Young children should be carefully supervised when they are in the area of the item. 

·

 Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris. Use this 

appliance in a well-ventilated space only. Do not use it in a building, garage or any other enclosed 
area. 

Acorn Nut 

Qty. 3 

Long Bolt 

Qty. 4 

Short Bolt 

Qty. 10 

 

Summary of Contents for PG169T-C

















Reviews: