Lock Upgrade Kits
If required, the lock Upgrade Kit consists of a pair of the new chamfered interlock latch
blocks, a small tube of thread lock liquid and installation instructions. One kit is requ
for each unit (if affected).
. If you are required to complete this repair, please contact Garaventa Technical
Support and inform us so that we can update our records.
structions
Tools
Required:
3 mm Allen key
Phillips
screwdriver
ent
roun
Procedur
•
Open lower door and remove the screws holding the escutcheon plate to the
doorframe, apply Loctite, and reinstall the plate. Tighten securely.
the latch block from the escutcheon plate. Save the fasteners for
installation of the new block. Discard the old block.
e new block to the door escutcheon
nnel-shaped side of the hole are
is means the rounded edge and
nding and face up at the upper
•
Adjust the position of the block so the locking pin is approximately centered in the
hole in the block and tighten.
perating t
the
open slig
ng
ck as the platform leaves the landing.
k desig
ate.
ired
Dealer Action Required
1
In
9
9
Upgrade Kit Cont
2 X new chamfered (
1 X tube of Loctite
s:
ded) latch blocks
e:
9
9
Installation
•
Remove
•
Apply Loctite to the fasteners and install th
plate.
•
Ensure the rounded edge of the block and fu
facing towards the end of the locking pin. Th
funnel-shaped hole face down at the lower la
landing.
•
Test the locking function several times by o
landing. Try operating the lift with the door
pin assembly cannot jam on the lock blo
This should not be possible with the new bloc
•
Repeat the process with the upper landing / g
he platform away from
htly to confirm the locki
n.
ITEM #05751 Revision B
Garaventa Lift, April 2008
24
