Battery Powered Emergency Lowering (Optional) –
Leadscrew Drive Model Only
If equipped, the battery-powered emergency lowering system is automatically
activated in the event of a power failure. A secondary 24 VDC motor is engaged
to the main screw of the lift and allows a user inside the lift to travel
downwards
only
. This system moves the platform at a speed of approximately 1 ft/min. The
battery powered emergency lowering is controlled by the down directional switch.
Travel is permitted in the down direction only.
Auxiliary Power (Standard) on mains powered units–
Hydraulic Drive Model Only
The auxiliary power system is automatically activated in the event of a power
failure. 12 Volt DC batteries allow a user inside the lift to travel up or down in
exactly the same manner as the normal operation.
Platform Overload Sensor
(EU models only)
European platforms are equipped with a platform overload sensor as required by
code. When the weight loaded on the platform exceeds the rated capacity by
75kg’s the lift will not operate. The load must be removed from the platform until
the sensor resets allowing the lift to become operable.
Genesis Vertical Lift Owners Manual
Page 10
Item#11301-H-OM
